Eric Zeman / Android Authority
- Data has leaked associated to the Snapdragon Put on 5100 and 5100 Plus chipsets.
- Qualcomm seems to be making huge strikes in direction of power effectivity with these new fashions.
- It’s possible we’d see a wearable with at the least one in all these chipsets launch in 2022.
Smartwatches primarily based on Google’s Put on OS platform all endure from one main disadvantage: poor battery life. Regardless of finest efforts from numerous firms, Put on OS watches simply can’t compete in the case of battery life should you evaluate them to the Apple Watch and different wearables primarily based on completely different techniques.
See additionally: Every part it’s essential to find out about Put on OS
In response to some newly leaked information (by way of WinFuture), Qualcomm could possibly be working to fight this drawback. Allegedly, the anticipated Qualcomm Snapdragon Put on 5100 and 5100 Plus chipsets could possibly be all about power effectivity.
In response to WinFuture, Qualcomm has confronted some delays, although. Apparently, the corporate has modified up its authentic designs for the chipsets, which may lead to a later-than-expected launch.
Nevertheless, we absolutely anticipate the Snapdragon Put on 5100 collection to launch inside a smartwatch sooner or later in 2022.
Qualcomm Snapdragon Put on 5100
Each variations of the Snapdragon Put on 5100 must be constructed on a 4nm course of. Qualcomm allegedly altered this not too long ago from an initially deliberate 5nm course of, which may end result within the beforehand mentioned delays.
Typically, a smaller construct course of ought to produce higher power effectivity. It’s early days but, but when the Put on 5100 is a 4nm construct, it will possible be probably the most energy-efficient wearable chipset from Qualcomm.
A 4nm construct may make these chips quick however power-efficient.
Inside, the wearable chipset ought to have 4 ARM Cortex-A53 cores that may work at a most of 1.7GHz. These cores could possibly be supported by an Adreno 702 GPU with clock speeds as much as 700MHz. As much as 4GB of LPDDR4X RAM must be supported, though we doubt a wearable would include that a lot (these chips will also be utilized in non-wearable merchandise). eMMC 5.1 flash reminiscence also needs to be supported.
The Snapdragon Put on 5100 also needs to assist Bluetooth 5.2 and LTE connections. That final bit will must be utilized by producers to work, although.
Lastly, and most clearly, the Snapdragon Put on 5100 will nearly definitely assist Put on OS and Android. You must anticipate wearables with this chip to launch with Put on OS 3 out of the field.
The 5100 Plus mannequin
The 5100 Plus mannequin could have the identical specs because the vanilla mannequin. Nevertheless, it is going to have a further chip hooked up: the QCC5100 co-processor. This product has already been in the marketplace, so we all know fairly a bit about it.
Primarily, the QCC5100 must be there to deal with offloaded duties from the primary chip. For the reason that QCC5100 is a 22nm construct, it will likely be slower and fewer power-efficient than the first chipset. This is able to make it ideally suited for dealing with lower-level duties similar to Bluetooth/WLAN transmission, powering the always-on-display, and even delivering notifications.
Principally, the QCC5100 would deal with low-performance duties whereas the core of the Snapdragon Put on 5100 Plus wouldd take over when efficiency is important. This could, in concept, make it extra highly effective and higher at regulating energy consumption than the vanilla mannequin.
Keep tuned, as we’ll possible quickly have much more info on these chips and the wearables they’ll energy!